Scraper Systems Model 330

Snow Removal Equipment for Trucks: Permanent Installation

Patent #5802654

To pause the slideshow, hover your curser over any image in the gallery

Permanent installation uses 5 ft. deep concrete footers.

Unit Details

  • In-ground installation; permanently embedded in 30 in. dia. x 5 ft. deep concrete footers
  • Made of heavy-duty 12 in. wide flange beams and 8 in. structural tubing
  • Extra-wide 15 ft. drive-thru frame
  • Accommodates truck & trailer heights from 9 ft. to 16 ft. (continuously adjustable)
  • Deep-V plow blade
    • 16 in. high concave radius x 13.3 ft. length
    • Heavy steel plate construction
    • 1 in. thick full-length rubber wiper squeegee (bolted on)
  • Accu-Track plow guide system for full flush contact with roof
  • Harrington 1/2 ton extreme-duty electric chain hoist for plow height adjustment
  • Pre-wired weather-tight electrical boxes mounted on driver's side steel beam column, including:
    • Operator's control box with hoist up & down pendant
    • Off/On safety switch main connection — just 110V/15 amp service required
  • 250W metal halide flood light with photocell mounted at top of unit
  • (2) 6 in. x 6 ft. Schedule 40 concrete-filled steel pipe bollards
  • 3-step durable all-weather finishing process; machinery-grade, rust-prohibitive enamel

High Quality, Efficient, Low Maintenance Design

The Scraper System Model 330 is our Permanent Installation model based on our original design. Made of heavy duty structural steel with a 3-step durable all-weather finishing process, its high-quality construction sets the pace for all Scraper Systems trailer top snow plows — FAST, EFFICIENT, LOW MAINTENANCE.

Permanent Installation

The abuse-resistant Model 330 snow removal unit involves a Permanent Installation, where the structural steel frame is installed and imbedded in-ground directly into 5 ft. deep x 30 in. diameter concrete footers. Location selection is important, as it cannot be easily removed or relocated (will require torch cutting at the base of the unit or excavation).

Continuously-Adjustable Height

Like all of our Scraper System models, the drive-under frame measures a generous 15 ft. across, while accommodating truck trailer heights from 9 ft. to 16 ft. The plow assembly is powered by our Harrington 1/2 ton extreme duty 110V electric chain hoist controllable from the operator's station mounted on the driver's side beam column or by the optional radio remote control system.

Deep-V Plow Assembly

The deep-V plow blade is over 13 ft. wide and discharges deep, heavy snow to both sides of the trailer. This removes more snow more quickly than other designs. Even in uneven terrain, the pliable rubber edge of the plow blade remains in constant contact with the truck trailer tops thanks to our Accu-Track guide system. And it is safe to use on translucent roofs.

Assembly and Installation

The unit comes pre-wired from our factory. Most installations can be completed in one day. Extreme site or underground conditions may require additional time. The 330 Model comes with two 6 dia. x 6 ft. Schedule 40 concrete-filled steel pipe bollards set in 18 in. diameter concrete footers. Scraper Systems provides employee training for safe operation of the snow removal system.

Request a quote or Contact Scraper Systems

Request a quote or receive more information

Efficient design works every time.

Call 888-340-4344.

Scraper Systems snow removal system for trucks and trailers